[Wear-Hard] Twiddler-1 conversion to USB?

[tonyh]

I think you just need one of these:

http://www.tekgear.com/index.cfm?pageID=90&prodid=58&section=99

-Tony

On Sat, 30 Jun 2007 00:21:14 -0400, Bryan Hurley wrote
>  
> The twiddler is a proprietary serial connection. it is standards speeds with standard pinouts, but proprietary data I believe. So you could get it to work using a USB to serial adapter to plug into the USB port, but it would still be a serial device. To get it to PS/2 you would need to have fun with a microcontroller to convert the twiddler data into standard ps/2 format data.
>  
> Then again, since it is serial, you can also get a serial to bluetooth adapter and connect it wirelessly as a bluetooth serial device.. Of course you need power too.
>  
> -Bryan Hurley
> 
>  
> On 6/29/07, Harmon Seaver <hseaver at gmail.com> wrote:  I just dug out my Twiddler, haven't played with it for years. It's
> the old style, not a #2, and has the old PC din connectors, although I
> added PS2 adapters on those. Anyway, I'm wondering if anyone has rewired
> theirs for USB?
>   Since the DIN connector is just for power, and the actual key codes
> go through the serial connector it seems doable, maybe even just with
> PS2 to USB adapters and a serial to USB adapter, but that also would be
> pretty clutzy. Much better to totally rewire the thing, if I had a
> schematic for doing it????
> 
> --
> Harmon Seaver
> 
> _______________________________________________
> Wear-Hard mailing list
> Wear-Hard at haven.org
> http://www.haven.org/mailman/listinfo/wear-hard
>

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.haven.org/pipermail/wear-hard/attachments/20070630/f9136154/attachment.html