[Wear-Hard] Heavy MyVu Crystal Modifications

[Olli Markkanen]

2009/6/14 Brian Kuriyama <yosh.five7 at gmail.com>

> It's definitely the same chip, but the chip's package is BGA as described
> in diagram 12.2. While supporting dvi may not be an issue, wiring it up to
> the myvu board is impossible. You would have to transplant the chip, which
> would require very expensive equipment and someone with a lot of expertise
> in the art of doing so.
>
> Also, that "decoder" it mentions in the diagram probably refers to one of
> the philips decoders it mentions on page 5
>

Ok, so it looks like no dvi for me then. I'd still disagree on that s-video,
because that page 10 pic clearly states that the s-video and composite wires
both use the same decoder, so if it can eat composite, why not s-video then?

>Olli,
>Glad to see you posting on the list! If you're really that close to
>building a wearable, come here for support and cheering!
>
>I'd also love a wearable IRC channel, but never found one. It seems
>the folks into wearables like mailing lists and asynchronous
>communication. I've been told that freenode#linuxice has some wearable
>folks who come in frequently (source: Wirelessdreamer of joy2chord).
>If you'd like to start a channel on Freenode or any other server I
>will be a frequent user."

Yeah, I'm so going to build it this summer.

I'm not going to start the channel, at least not yet. I don't use IRC lot
yet, that will change
if the wearable works well enough. I'm newbie with it, so I'd just ban
myself or something.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.haven.org/pipermail/wear-hard/attachments/20090614/980cbce1/attachment.html